Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: pro_crip on June 02, 2010, 01:03:42 PM

Title: Seiden switch fit in speedball
Post by: pro_crip on June 02, 2010, 01:03:42 PM

I saw a great 23 step stereo stepped attenuator at the hificollective and was wondering if it would fit in a crack with the speedball upgrade? The switch is 45x45x65 (mm) or thereabouts. I also assume I'd need the unbalanced stereo not the balanced stereo version. Thanks a bunch, The Simpsons are on.

Rich

Title: Re: Seiden switch fit in speedball
Post by: GLF on June 02, 2010, 02:51:13 PM

Looks like that might fit. It would be pretty snug though. You might have to move the speedball board that is closest to the attenuator.

Title: Re: Seiden switch fit in speedball
Post by: tdogzthmn on June 03, 2010, 07:40:14 PM

Is this the product you are referring to?

http://www.hificollective.co.uk/catalog/seiden-pole-switch-p-6343.html

Title: Re: Seiden switch fit in speedball
Post by: pro_crip on June 04, 2010, 09:24:46 AM

That looks about right but I ran into a problem trying to order from them, 2 mono attenuators and 1 stereo attenuator. All populated with Takman carbon film resistors. So I just went ahead and ordered the custom goldpoints instead. Pcx has the Takman carbons at a buck apiece. Never mind the 15 buck AN tants. Thanks anyway.

Rich