Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: BenZ2011 on April 26, 2015, 06:20:49 PM

Title: Speedball replacement part
Post by: BenZ2011 on April 26, 2015, 06:20:49 PM

Hi, guys! I finished building the bottlehead crack amp a few weeks ago, and really enjoyed it, and I decided to add the speedball upgrade. After the installation, I release the left CS4 board's LED didn't lit up, and after resistance check on the transistors, I wanted to be sure, so I switch the transistors between the A and B, but as I was trying to take off the transistor, I burned the board. I'm wondering if there a way to buy replacement cs 4 boards? Thanks!

Title: Re: Speedball replacement part
Post by: fullheadofnothing on April 27, 2015, 07:01:42 AM

Email all parts requests to replacementparts at bottlehead dot com.