Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: plynch on May 24, 2015, 12:26:13 PM

Title: New Crack Build Terminal 22 Resistance Concern. [resolved]
Post by: plynch on May 24, 2015, 12:26:13 PM

Hello all, new builder here. I've nearly passed all of the resistance checks save for terminal 22. According to the manual it is supposed to read 0 ohms. For me it's reading upwards for 2k ohms and climbing. I'm new to this kind of thing so I'm not sure where to check in order to resolve this issue; if I even have to at all. Any information would be greatly appreciated.

Title: Re: New Crack Build Terminal 22 Resistance Concern.
Post by: Paul Birkeland on May 24, 2015, 12:52:57 PM

You could try tightening all of the transformer screws.

-PB

Title: Re: New Crack Build Terminal 22 Resistance Concern.
Post by: plynch on May 24, 2015, 01:01:49 PM

Oh wow, that seemed to help thanks!