Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Nathan on May 25, 2015, 07:42:05 AM

Title: Speedball question
Post by: Nathan on May 25, 2015, 07:42:05 AM

I have a speedball installed and no longer have the installation manual. Which smaller speedball board is for the right channel? Thanks in advance and happy Memorial Day

Title: Re: Speedball question
Post by: Paul Birkeland on May 25, 2015, 08:26:15 AM

This actually isn't particularly important, as they are both the same.  In the manual, the "A" board goes next to the headphone jack.

Title: Re: Speedball question
Post by: Nathan on May 25, 2015, 06:17:50 PM

I know they are the same - I have a right channel issue. I want to know which board to focus on- right or left

Title: Re: Speedball question
Post by: Paul Birkeland on May 26, 2015, 06:15:59 AM

Quote from: Nathan on May 25, 2015, 06:17:50 PM

I have a tight channel issue. I want to know which board to focus on- right or left

If you would like a second set of eyes to confirm your determination that the right C4S board is the problem, do feel free to post your voltages and symptoms.

Title: Re: Speedball question
Post by: Nathan on May 26, 2015, 02:37:46 PM

I can't find my speedball build manual- I would like to get another copy so I can check things and post my voltages

Fwiw one led on the left board is out- some LEDs took a bit to illuminate

All I get out of the right channel is hum

Title: Re: Speedball question
Post by: Paul Birkeland on May 27, 2015, 06:50:02 AM

Speedball voltages are about the same as the voltages in the stock build.

-PB