Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Quickie => Topic started by: Bonzo on July 14, 2015, 04:29:12 AM

Title: Quickie grounding
Post by: Bonzo on July 14, 2015, 04:29:12 AM

Good evening to all,
a dumb question: if I wanted to rebuilt my Quickie in a metal chassis, would I need to ground it?
If so, how could I do it?Where do I have to connect the chassis?
Thank you very much for your support!

Title: Re: Quickie grounding
Post by: mcandmar on July 14, 2015, 04:49:40 AM

Probably a good idea from a shielding point of view, i would connect to the ground bus that joins the RCA input sockets together.

Title: Re: Quickie grounding
Post by: Bonzo on July 14, 2015, 04:55:00 AM

Thank you...sounds easy...  8)

Title: Re: Quickie grounding
Post by: Paul Joppa on July 15, 2015, 07:57:43 PM

Quote from: mcandmar on July 14, 2015, 04:49:40 AM

Probably a good idea from a shielding point of view, i would connect to the ground bus that joins the RCA input sockets together.

I approve.

Title: Re: Quickie grounding
Post by: Bonzo on July 15, 2015, 08:41:41 PM

Thank you very much for your help!