Bottlehead Forum

Bottlehead Kits => S.E.X. Kit => Topic started by: rockbox on July 26, 2015, 04:23:28 PM

Title: Hiss/Static in right channel [resolved]
Post by: rockbox on July 26, 2015, 04:23:28 PM

I have a SEX 2.1 kit that I bought 7-8 years ago. It has developed hiss/static in the right channel. Any ideas on how to troubleshoot. I switched the tube to check if one of the tubes were going bad the the static is still in the same channel.


Since I bought the kit so long ago, I do not have the manual to check the resistances. Is there a place were I can download the manual?

Title: Re: Hiss/Static in right channel
Post by: rockbox on July 26, 2015, 04:48:08 PM

I think I figured it. I think the sockets were dirty or corroded, because after removing the tube and reseating it a couple of times, the static went away.