Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Strikkflypilot on October 31, 2015, 02:29:54 AM

Title: Voltage Question
Post by: Strikkflypilot on October 31, 2015, 02:29:54 AM

I just finished my second stock Crack today.
I found a small detail that isn't a big issue, but might confuse some.

During voltage checks it says 1 and 5 should be 75-90v
A1 and A6 should be 90v(less comfusing if it would say 75v-90v also here?)
Of course I am aware of the 10-15% margin.

Title: Re: Voltage Question
Post by: Paul Birkeland on October 31, 2015, 08:02:59 AM

Yeah, the 15% range should cover that in most cases.

-PB