Bottlehead Forum

Bottlehead Kits => BeePre => Topic started by: Jeroen on November 01, 2015, 01:39:33 AM

Title: Beepre noise
Post by: Jeroen on November 01, 2015, 01:39:33 AM

Let me start by saying I love the Beepre. It's a great combo with the Eros and Paramounts!

Unfortunately I got a bit of a problem with noise. When the volume is turned down I get a little bit of noise, no problem at all. When I turn the volume up, the noise is increasing to a quite loud level. I can't figure out the problem. Since the tubes (and powersupply) are between volume and output the problem can't be there. I used the shielded wire from the kit, all earth connections are fine.


Does anyone has a suggestions what could be the problem? Help is very appreciated!

Best Regards,

Jeroen

Title: Re: Beepre noise
Post by: Jeroen on November 01, 2015, 02:51:49 AM

Hi Grainger,

Thank you for the tip. I'll make a pair of shorting plugs.