Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: ZestyLemon on November 01, 2015, 04:14:52 AM

Title: Crack w/Speedball LED issue [resolved]
Post by: ZestyLemon on November 01, 2015, 04:14:52 AM

I am having an issue with the 2 LEDs on the bottom left of the big PCB not lighting up, the voltage checks come out correct (+/- 15%) and sound comes out. I have checked all the connections on the PCB and reflowed them but that hasn't helped. Any advice?

Title: Re: Crack w/Speedball LED issue
Post by: Paul Birkeland on November 01, 2015, 06:12:54 AM

If the voltages at 7 and 9 are correct, the LED's on the big board should be lighting up.  What voltages do you have at 7 and 9?

Title: Re: Crack w/Speedball LED issue
Post by: ZestyLemon on November 01, 2015, 09:00:49 AM

It turns out I had the cable from 9L going the the wrong side of the board, swapped it over to the O in the opposite corner and powered it on and the 2 LEDs powered on. The amp sounds so much better now. Thanks for your help!