Bottlehead Forum

General Category => General Discussion => Topic started by: frank bare on February 03, 2016, 04:34:55 AM

Title: PJCCS manual question
Post by: frank bare on February 03, 2016, 04:34:55 AM

New to Bhead forum. Enjoying the process of building Quickie/Qsand and PJCCS.

Help with manual. As those who have built this, on pg 23/24 of PJCCS manual refers to wiring Red and Black to +reg and kreg.

Get down to pg 26 and 27, I read a "-reg"...

Logic tells me that the +reg and kreg is correct? Can anyone clarify?

Thank you,
bare

Title: Re: PJCCS manual question
Post by: Paul Birkeland on February 03, 2016, 06:03:21 AM

You are correct, the red wire does not connect to -reg, but rather to +reg.   

We'll get the manual corrected, and appreciate the assistance.

-PB

Title: Re: PJCCS manual question
Post by: frank bare on February 03, 2016, 01:31:14 PM

Thank you PB. My first time with the Forum, and I appreciate your fast response. Now back to the solder iron and install the PJCCS. Anxious to hear what it will do.

Can't mention enough...stock Quickie is so full of that magic tube sound...lifelike!

bare