Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: robertone1 on May 13, 2016, 11:42:38 PM

Title: Rectifier Diodes
Post by: robertone1 on May 13, 2016, 11:42:38 PM

Hi all again,have I stuffed up my install of the B+ supply rectifier diodes?  I lined the bodies up over one another as per manual,but on the photos
there's quite a gap between them. Not sure if these get hot or not. Should I get new ones and redo this.

Thanks.

Title: Re: Rectifier Diodes
Post by: fullheadofnothing on May 14, 2016, 09:26:16 AM

The specified spacing is to prevent the leads from touching and creating shorts. Your mounting appears acceptable.