Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Smash => Topic started by: malvo on May 16, 2017, 09:54:37 AM

Title: a couple of voltage errors [resolved]
Post by: malvo on May 16, 2017, 09:54:37 AM

Dear all, total electrical newb here, and so can't tell if these readings are a problem or nothing to worry about. So stock smash done, resistance check good, all voltages spot on except for these three:

30  .020--will fluctuate as high as .025 and as low as 0.16
A6 -.321 (a negative reading?)
C6 -.265 (another negative)

Any advice appreciated. Cheers!

Title: Re: a couple of voltage errors
Post by: fullheadofnothing on May 16, 2017, 10:09:44 AM

That's fine. Your meter is finding 0 volts and trying to figure out how to display it.

Title: Re: a couple of voltage errors
Post by: malvo on May 16, 2017, 10:46:24 AM

Excellent, I'll fire it right up. Thanks!