Bottlehead Forum
Bottlehead Kits => S.E.X. Kit => Topic started by: Gofspar on December 10, 2017, 04:53:46 AM
-
Is there anything I can use to remove the paint without destroying the choke, I see that mfg of the choke used a sort of adhesive on the can so it looks like it'll be impossible to remove the can from the choke itself.
-
Just sand the paint smooth on the channel frame (I presume that is what you are calling the can) and repaint it.
-
I would add that using any solvents to remove paint on the chokes will be risky, as the solvent may permeate what holds the choke together and damage it.