Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Quickie => Topic started by: oguinn on July 25, 2018, 05:55:41 AM

Title: PJCCS Voltage Checks
Post by: oguinn on July 25, 2018, 05:55:41 AM

I installed the PJCCS last night while waiting for my base to dry and ran the voltage checks in the book. Everything looked ok except that A6 and B6 were a little high - 24v for A6 and 27v for B6. The manual lists them at 19-21v.

Is this within the acceptable range?

Title: Re: PJCCS Voltage Checks
Post by: Paul Joppa on July 25, 2018, 07:08:54 AM

Yes, those are desirable voltages.

Title: Re: PJCCS Voltage Checks
Post by: oguinn on July 25, 2018, 07:11:36 AM

That's awesome, thank you, Paul.