Bottlehead Forum
Bottlehead Kits => Crack => Topic started by: jake111 on March 22, 2019, 10:17:50 PM
-
I'm not getting any reading for the resistance test on OA and OB. I've reflowed the solder points.
I tested resistance across each 100uf cap leads and got nothing too. Shouldn't the meter range when this is done? I think I may have overheated the caps soldering the board wires on.
Thanks, Jess
-
No reading is not a problem. If you saw something like 5 ohms, that would be a problem.