Bottlehead Forum
Bottlehead Kits => Stereomour II => Topic started by: kivanculgener on April 27, 2020, 01:50:50 AM
-
Hi everyone
I am now prepairing my shunt regulator and released that 330k ohm 3w resistors
been send instead of 300k ohm for R4 .is it important.?...🙄
-
Oddly enough, you can definitely use 330K resistors in place of the 300K resistors.
OA and OB in the voltage checks will be about 330V instead of 300V, which isn't a problem at all. Kreg voltages will be a little on the high side as well, but still well within operational limits.
-
Thank you very much.