Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Crack-a-two-a => Topic started by: jtori on May 27, 2020, 06:52:19 AM

Title: Potential Instruction Manual Edits
Post by: jtori on May 27, 2020, 06:52:19 AM

Here are a few potential discrepancies I found in the Crackatwoa build instructions:

-- p. 33, last step - I believe this should read "around the outboard bars"

-- p. 40, first step - 1-1/2" was too short in my case.  Adding 1/4" to 1/2" worked for me.

-- p. 56, step 2 - I believe this should read D socket.

-- p. 60, first step - I believe this should read "Insert and solder ....

-- pp. 36 and 37 -- Instructions call for 33k-ohm, 1/8-watt resistors; the parts list specifies 33k-ohm, 1/4-watt resistors

Joe.

Title: Re: Potential Instruction Manual Edits
Post by: Paul Birkeland on May 27, 2020, 07:05:18 AM

Thank you Joe, I forwarded these along.