Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: fofo16 on July 11, 2020, 12:59:25 PM

Title: Voltage Check on 220VAC
Post by: fofo16 on July 11, 2020, 12:59:25 PM

hello

my country voltages/frequencies  220V , 60 Hz

how can i put the Voltage Check on 220VAC ?

sorry for my english

Title: Re: Voltage Check on 220VAC
Post by: Paul Birkeland on July 11, 2020, 01:06:32 PM

I am not quite certain what you are asking.  The Crack manual gives instructions for wiring for 220V on page 26.

Title: Re: Voltage Check on 220VAC
Post by: fofo16 on July 13, 2020, 05:13:00 PM

Quote from: Paul Birkeland on July 11, 2020, 01:06:32 PM

I am not quite certain what you are asking.  The Crack manual gives instructions for wiring for 220V on page 26.

I want to set the Voltage of the crack on 220v
How can I do it ?

Title: Re: Voltage Check on 220VAC
Post by: Paul Birkeland on July 13, 2020, 05:14:40 PM

When you build the Crack, the instructions on page 26 provide that information.

If you have an old Crack with the old power transformer, this is not an option.