Bottlehead Forum

Bottlehead Kits => Jaeger Speaker => Topic started by: pfontana on July 26, 2020, 09:45:45 AM

Title: Upgrading caps in passive and impedance boards
Post by: pfontana on July 26, 2020, 09:45:45 AM

Hi,
I was thinking of changing out the caps in the passive and impedance boards.
Can I switch out the stock 4.7 250V with 4.7 100V's?
Thanks again,
Philip

Title: Re: Upgrading caps in passive and impedance boards
Post by: Paul Birkeland on July 26, 2020, 09:46:13 AM

Sure, 100V is an adequate voltage rating.

Title: Re: Upgrading caps in passive and impedance boards
Post by: oguinn on July 26, 2020, 12:26:08 PM

PB - is there much benefit in upgrading the caps (in your opinion)?

Title: Re: Upgrading caps in passive and impedance boards
Post by: Paul Birkeland on July 26, 2020, 12:35:22 PM

Not at all.