Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Jimb0 on August 15, 2020, 08:05:56 AM

Title: Using 1.0 Speedball on 1.1 Crack, slightly high O readings
Post by: Jimb0 on August 15, 2020, 08:05:56 AM

hi PB. Just finished building a crack. Using Speedball 1.0. All checked out normal except for the O readings on the big board. Got 116v/120v. Guessing its the tube so I will try more in a few minutes.

Title: Re: Using 1.0 Speedball on 1.1 Crack, slightly high O readings
Post by: Paul Birkeland on August 15, 2020, 08:06:24 AM

What are the voltages on the small board?