Bottlehead Forum
Bottlehead Kits => Crack => Topic started by: Markkr on November 28, 2020, 02:06:11 PM
-
What a cool build, I definately see myself buying other Bottlehead amps/pre-amps in the future.
Both amps were built side-by-side, both tested perfectly and worked without issue.
Next up, install Speedball into both amps. (Incidentally, I bought two amps so I could have one at home and one at work)
-
Nice work! Enjoy your new treasures.
-
Can you post a link to the Alps board you used? It's nice to see one that isn't all that wide.
-
Can you post a link to the Alps board you used? It's nice to see one that isn't all that wide.
Certainly, I bought from here: https://www.ebay.com/itm/PCB-for-ALPS-RK27112-Blue-velvet-v-2/131385931887
-
Very beautiful build!
What materials did you use to stain the wood case?
-
Very beautiful build!
What materials did you use to stain the wood case?
I’m not overly satisfied with my wood finishing. I used Minwax (oil based) Dark Walnut, and Minwax satin spray polyurethane. I tried to protect the edges of the box with blue painters tape during the build, but if you look close the poly peeled up with the tape so I need to sand and re-coat those areas. Also I’m not in love with the dark walnut color.
-
If you can't find anything to do put the stock pot in one and tell us what you think. Pretty work!
-
One of the best builds that I have ever seen!!!
-
Thanks for the kind words.
I installed the speedball kit in one of them yesterday, WOWOWOW! I cannot express how satisfied I am with this product!!
-
What do you really think!
-
Awesome! When you do as beautiful a job as you did , a glass base would be in order! You will have no problems building any Bottle Head kits in the future!
Terry