Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Reduction => Topic started by: ryburdman on February 25, 2021, 08:37:05 AM

Title: Resistance check discrepancies
Post by: ryburdman on February 25, 2021, 08:37:05 AM

All is checking out but 44, 45, 47
44 1.6M
45 1.6M
47 13M

Title: Re: Resistance check discrepancies
Post by: Paul Birkeland on February 25, 2021, 08:41:13 AM

Those check out.

Title: Re: Resistance check discrepancies
Post by: ryburdman on February 25, 2021, 08:55:23 AM

Ok my manual shows
44 0L
45 0L
47 0L

Title: Re: Resistance check discrepancies
Post by: Doc B. on February 25, 2021, 09:13:54 AM

Yup, those really high resistance readings you are getting are equivalent to Over Limit readings on most meters.

Title: Re: Resistance check discrepancies
Post by: canonken on March 02, 2021, 01:45:01 PM

I just came here to ask the same!  For reference, my Fluke 101 reads:
44: 5M (25M if I move the ground lead to the input buss wire)
45: 4.5M
47: 8M

I did get a lot of readings between 10-30M on ones with a * (no issue), but these threw me.

Bottlehead crew, your answer makes sense and glad to validate.

Thanks!