Bottlehead Forum

Bottlehead Kits => Reduction => Topic started by: ryburdman on February 25, 2021, 10:27:51 AM

Title: One last Voltage question
Post by: ryburdman on February 25, 2021, 10:27:51 AM
One last question again thanks for all the help.
My voltage reading on 44 and 45 are also different than the manual
44 80v
45 80v
Looking through the forum this seems to be fairly common but its enough different from the manual I thought I should ask. All 4 LED's light up and everything else tests in limits
Title: Re: One last Voltage question
Post by: Paul Birkeland on February 25, 2021, 12:15:00 PM
I would let the tubes run in for 50 hours and check that again. Those will likely lower with some burn in time.

-PB
Title: Re: One last Voltage question
Post by: niceguyjml on March 21, 2021, 08:13:38 AM
"Run the Amp" like leave it turned on but no RCA in/out put?
Title: Re: One last Voltage question
Post by: Paul Birkeland on March 21, 2021, 09:10:37 AM
You can have the cables hooked up.  This is generally a good idea with the inputs at least.