Bottlehead Forum

Bottlehead Kits => Moreplay => Topic started by: patrick620 on March 09, 2021, 06:24:11 AM

Title: Onto the audio stage
Post by: patrick620 on March 09, 2021, 06:24:11 AM

PS section is done. All voltages and solder joints are spot on and would pass FAA avionics inspection. I did not worry about cleaning the solder joints or using conformal coat. Not much rosin to worry about. Other than the mechanical issue with the keyways on the pots preventing the shafts to be in line no problems. This is how P1 (prototype 1) works. Always gonna be bugs to work out. My review so far is 10 out of 10 on the design and very comprehensive procedure.

Title: Re: Onto the audio stage
Post by: Paul Birkeland on March 09, 2021, 09:53:29 AM

I see lots of great connections and soldering in there!

Title: Re: Onto the audio stage
Post by: patrick620 on March 09, 2021, 11:33:03 PM

Quote from: Paul Birkeland on March 09, 2021, 09:53:29 AM

I see lots of great connections and soldering in there!

Thank you very much, Paul. Nothing fancy here.

Title: Re: Onto the audio stage
Post by: patrick620 on March 10, 2021, 12:11:48 AM

5W resistor assembly...I spaced the components with a piece of cardboard before soldering it all together. I am not sure how much heat that resistor might put out.