Bottlehead Forum

Bottlehead Kits => S.E.X. Kit => Topic started by: brunlar on May 08, 2021, 07:35:55 AM

Title: 330k ohm instead of 300k ohm c4s
Post by: brunlar on May 08, 2021, 07:35:55 AM

Hi all,

Have been using completed S.E.X. 3.0 for several weeks. Was beginning to assemble the c4s add on. The parts list says there should be 2 x 300K ohm resistors. I was sent 2 x 330K ohm resistors instead. Was this intentional or acceptable replacement? Thanks.

Title: Re: 330k ohm instead of 300k ohm c4s
Post by: Paul Birkeland on May 08, 2021, 08:00:10 AM

That is definitely not intentional but they will work just fine in the R2 position.