Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => Reduction => Topic started by: joegibney on June 13, 2021, 11:42:56 AM
-
Need a phono pre. Looking at a Reduction 1.1 with Integration.
In my set up, the phono cables are 10' into a Onkyo TX-TZ3100, CD jacks.
Would the Reduction overcome the long cable length?
Shure M91ED
Thanks for any help.
Joe
-
It's marginal. To retain 20kHz response at 1dB down or less, you'd need cables of less than 60pF per foot, i.e. a total capacitance of 600pF. Half that would be better. Many cables, but not all, meet that requirement.
-
I'm an old man, best I can hear is 15khz on a good day, Thanks Paul.
Joe
-
I have the Amazon basics.
Good enough,
Click buy!