Bottlehead Forum

Bottlehead Kits => Reduction => Integration => Topic started by: Neuronal on July 31, 2021, 11:59:39 AM

Title: Integration resistor question
Post by: Neuronal on July 31, 2021, 11:59:39 AM
Hi all - I’m building the integration upgrade and was wondering what the wattage was on the 49.9 Ohm and 237 Ohm resistors? 1/8W and 1/4W respectively? The wattage isn’t in my version of the manual. Thanks in advance - Bob
Title: Re: Integration resistor question
Post by: Paul Birkeland on July 31, 2021, 02:40:48 PM
The 237 ohm resistors need to be at least 0.007W and the 49.9 ohm resistors need to be at least 0.04W. 
Title: Re: Integration resistor question
Post by: Neuronal on August 01, 2021, 12:46:05 PM
Cool, thanks!