Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => Reduction => Topic started by: Overthehill on February 18, 2022, 03:48:19 PM
-
Hi,
All my voltages are correct on all pins except 44,45. I have 85volts. According to manual it should read 0V. I checked all connections and all seem o.k. I found a similar thread and a response was to leave amp on for 90 hours and recheck it. This is a new build.
-
You can ignore those two if everything else is OK. There's indeed no DC voltage there, but the large amount of AC voltage will show different numbers on different meters.
-
Thanks PB! I will try it and if it works i will install the integration mod.