Bottlehead Forum

Bottlehead Kits => Moreplay => Topic started by: 100r05 on March 10, 2022, 06:26:22 PM

Title: A5 reading 220 ohm
Post by: 100r05 on March 10, 2022, 06:26:22 PM

I just finished my build and A5 is reading 220 ohm, the manual says it should be 0-100ohm,
Any pointers in tracking the issue down?

Title: Re: A5 reading 220 ohm
Post by: Paul Birkeland on March 10, 2022, 06:37:05 PM

The manual says it should be 0-100K, which is 0-100,000 ohms.  The value that you get will depend a bit on the position of the balance pot.  What you don't want to see there is an "OL" or a value well outside the 100K limit.