Bottlehead Forum

Bottlehead Kits => Stereomour II => Topic started by: Wayne100 on March 20, 2022, 08:04:27 AM

Title: Stereomour almost working [resolved]
Post by: Wayne100 on March 20, 2022, 08:04:27 AM

Did some troubleshooting with doc the other day and found 2 blown resistors going from terminal 44 to term 30 and 31. sent me new ones ,put them in and did voltage checks. All good except terminal 4 and 17 both zero on startup which is right but after about 30 seconds both read 9 volts. Is this ok?

Title: Re: Stereomour almost working
Post by: Paul Birkeland on March 20, 2022, 08:06:48 AM

Do they read 9V, or something else like 9mV?

Title: Re: Stereomour almost working
Post by: Wayne100 on March 20, 2022, 08:14:32 AM

you are right mv

Title: Re: Stereomour almost working
Post by: Paul Birkeland on March 20, 2022, 08:14:52 AM

0.009V is plenty close to 0V in that position.

Title: Re: Stereomour almost working
Post by: Wayne100 on March 20, 2022, 08:15:39 AM

Thanks Paul