Bottlehead Forum

Bottlehead Kits => Crack-a-two-a => Topic started by: CORedhawk on May 10, 2022, 11:59:20 AM

Title: 13 ohm 1/4W resistor
Post by: CORedhawk on May 10, 2022, 11:59:20 AM
Page 46 instructs the insertion of a 13 ohm resistor (brown, orange, black, gold, brown) into the R1 position on the A side of the board. I found two resistors that measure 13 ohms but the colors are (brown, orange, black, gold). I assmre this is correct because it measures correctly and I don't see any other resistors with brown, orange, black, gold, brown) in the components. Am I correct? Thanks!
Title: Re: 13 ohm 1/4W resistor
Post by: Doc B. on May 10, 2022, 12:02:45 PM
If it measures right, it is right. That last color band is just a tolerance indicator and we often have to substitute parts these days.
Title: Re: 13 ohm 1/4W resistor
Post by: CORedhawk on May 10, 2022, 01:04:35 PM
Thank you