Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Crack-a-two-a => Topic started by: adeep42 on June 26, 2022, 10:27:16 AM

Title: C2a footprint
Post by: adeep42 on June 26, 2022, 10:27:16 AM

Sold my Crack with Speedball after I started using a SET amp with headphone jack. About to get a new amp with no headphone jack but a record out circuit. Am thinking about a C2a. Would the record out be a good input and need to know the footprint of the base.  Thanks in advance for the input.

Alan

Title: Re: C2a footprint
Post by: Paul Birkeland on June 26, 2022, 11:13:35 AM

The C2A is on a 12" wide by 10" deep plate, so figure 13.5" x 11.5" or so for a footprint.