Bottlehead Forum
Bottlehead Kits => Moreplay => Topic started by: Happy Ghost on July 11, 2022, 04:29:35 AM
-
Hello,
I am getting a slightly higher B+ voltage (~ 326.3V) than what is recommended in the manual. My incoming A/C voltage is 120.5V. From previous posts regarding this issue, it should not be a show stopper and I can move along. But just wanted to confirm once more.
Thanks!
-
Yes, I would go ahead and keep building. Just be sure that the incoming AC wiring is hooked up properly for the instructions for that voltage range in the manual.
-
Thanks Paul! Yes.. the transformer windings were done correctly. There were no issues also in the power transformer secondary test. I was getting 9.48 VAC and 119.6 VAC there ...
-
Yeah, I am getting 320-321.6 VDC for 123.3V.