Bottlehead Forum

Bottlehead Kits => S.E.X. Kit => Topic started by: mistercheah on October 26, 2022, 04:22:00 PM

Title: Power Line voltage test [resolved]
Post by: mistercheah on October 26, 2022, 04:22:00 PM

I am unable to obtain any values during the powerline test. So to ensure the meter and the power supply outlets are not faulty, I tested the IEC inlet for my Crack. The result was the correct value i.e. 240V.

Title: Re: Power Line voltage test
Post by: ccmccull on October 26, 2022, 06:23:02 PM

One idea: make sure you installed the fuse properly. It doesn't go in the closed square tube. The way to know you have it right if to make sure it'll contact the metal tabs inside the compartment.

Title: Re: Power Line voltage test
Post by: mistercheah on October 27, 2022, 01:23:25 AM

Quote from: ccmccull on October 26, 2022, 06:23:02 PM

One idea: make sure you installed the fuse properly. It doesn't go in the closed square tube. The way to know you have it right if to make sure it'll contact the metal tabs inside the compartment.

Yes, it was the fuse. Problem resolved. Thanks.