Bottlehead Forum

Bottlehead Kits => BeePre => Topic started by: rsmiii on November 24, 2022, 06:40:56 AM

Title: Voltage Off, Before Output Wiring [resolved]
Post by: rsmiii on November 24, 2022, 06:40:56 AM

Basic BeePre 2.0 — Page 55 of the build manual:

Voltage check, 14U & 6 = 95VDC
Voltage check, 14U & 16 = 95VDC

Target measurement "should be close to 100VDC."
Please, is this 5VDC discrepancy concerning?
All other resistance and voltage checks on the build, to this point, have been right on target.

Title: Re: Voltage Off, Before Output Wiring
Post by: Paul Birkeland on November 24, 2022, 06:57:44 AM

No, that 5V discrepancy means that your tubes have higher emission than the ones I used when we wrote the manual ;)

Title: Re: Voltage Off, Before Output Wiring
Post by: rsmiii on November 24, 2022, 08:44:42 AM

Thank you for the reassurance!
All well – My BeePre 2.0 is up and working great with the Kaiju right now.