Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => MonAmour => Topic started by: blackharp on January 24, 2023, 10:48:29 AM
-
Anyone know where I can find a fancier on/ off switch for the Bee Pre 2? Perhaps in brass or gold?
-
This is one I have used before, though you may need to slightly file the hole for it to not fit too snugly.
https://www.mouser.com/ProductDetail/Marquardt-Switches/1683.1101?qs=4EOvy6wCNnuI4PiOeAczdg%3D%3D (https://www.mouser.com/ProductDetail/Marquardt-Switches/1683.1101?qs=4EOvy6wCNnuI4PiOeAczdg%3D%3D)
I'm not sure I have ever seen a brass rocker switch.
-
like this?
https://www.stewmac.com/electronics/components-and-parts/switches/switchcraft-toggle-switches/?utm_source=google&utm_medium=shopping&utm_campaign=2023-02-gp&gclid=EAIaIQobChMIrZKY4pyV_QIVgRvUAR0q4AiLEAQYAiABEgJxh_D_BwE
-
like this?
https://www.stewmac.com/electronics/components-and-parts/switches/switchcraft-toggle-switches/?utm_source=google&utm_medium=shopping&utm_campaign=2023-02-gp&gclid=EAIaIQobChMIrZKY4pyV_QIVgRvUAR0q4AiLEAQYAiABEgJxh_D_BwE
Not bad! It would match my Les Paul..
-
You know what they say about putting the round peg in the rectangular hole...
-
You know what they say about putting the round peg in the rectangular hole...
That I could easily craft a small, rectangular brass plate with a round hole in it?
-
I would use some adhesive as well to keep things from rotating. My experience with switches like that is that they like to back themselves out and get loose.
-
Careful with that Switchcraft switch - try to find some specs on it. If I'm not mistaken, it is meant to switch electric guitar pickup level signals - not for switching AC power on/off.
Rich