Bottlehead Forum
Bottlehead Kits => BeePre => Topic started by: blackharp on March 03, 2023, 12:18:59 PM
-
On page 51, it calls for a 130 ohm 2w resistor (brown, orange, brown, gold), but I don't have any. What I have instead are (4) brown, orange, black, black, brown resistors that do not match the photo. Are these 130 ohm (image attached) and can they be substituted?
-
If you use your meter to measure the resistance of one, what value do you get?
-
Wow. And I haven't even had a beer yet. You guys must have a lot of laughs at how brilliant we are. It measured 130. It is larger than the 330 ohm resistor, so I made a dumb assumption.
Thank you
-
No dumb assumptions or mistakes were made here, only gentle nudges toward self sufficiency through problem solving :)