Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Smack => Topic started by: shadowboxer on December 07, 2011, 03:24:14 PM

Title: Dimensions of the XLR plug on the smack?
Post by: shadowboxer on December 07, 2011, 03:24:14 PM
Hi Everyone,

I'd like to change out the 2 3-pin XLR plugs on the amp for a single 4-pin Neutrik and a blank.

In looking at the XLR plugs that I would mount to the amp, there are different diameter bodies/mounts.  What are the dimensions that I need for a drop in replacement for the 3 pin that comes with the amp?

Here is where I am looking: http://www.markertek.com/Connectors-Adapters/Audio-Connectors/XLR-Connectors/Neutrik-USA-Inc.xhtml (http://www.markertek.com/Connectors-Adapters/Audio-Connectors/XLR-Connectors/Neutrik-USA-Inc.xhtml)

Thanks!!
Title: Re: Dimensions of the XLR plug on the smack?
Post by: Doc B. on December 07, 2011, 03:31:37 PM
It's a D style. Any D style connector should fit the mounting holes.
Title: Re: Dimensions of the XLR plug on the smack?
Post by: shadowboxer on December 07, 2011, 03:32:59 PM
OK.  I'll order the D-style 4-pin Neutrick.

Thanks for the quick response!