Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: langendorf on December 16, 2011, 05:32:49 AM

Title: Danish Crack build
Post by: langendorf on December 16, 2011, 05:32:49 AM
Hi

I did build my crack a few months ago and just orderet the speedball upgrade and some tubes. So far i have changed the input signal wire with Mundorf 0,5mm gold silver. And the potmeter. Here are som pictures


(http://img97.imageshack.us/img97/4550/dsc3699d.jpg) (http://img97.imageshack.us/i/dsc3699d.jpg/)


(http://img843.imageshack.us/img843/3561/dsc3694z.jpg) (http://img843.imageshack.us/i/dsc3694z.jpg/)



(http://img685.imageshack.us/img685/2924/dsc3622j.th.jpg) (http://imageshack.us/photo/my-images/685/dsc3622j.jpg/)

(http://img62.imageshack.us/img62/8506/dsc3617p.th.jpg) (http://imageshack.us/photo/my-images/62/dsc3617p.jpg/)

Here i have changed the input cable with som mundorf gold silver 0,5mm in teflontube
(http://img6.imageshack.us/img6/922/dsc3862n.th.jpg) (http://imageshack.us/photo/my-images/6/dsc3862n.jpg/)

(http://img692.imageshack.us/img692/4376/dsc3847c.th.jpg) (http://imageshack.us/photo/my-images/692/dsc3847c.jpg/)

(http://img855.imageshack.us/img855/2314/dsc3854.th.jpg) (http://imageshack.us/photo/my-images/855/dsc3854.jpg/)




Title: Re: Danish Crack build
Post by: jrihs on December 16, 2011, 02:09:34 PM
Nice, I used similar signal wire and love it. I SOOO WISH I thought to reverse the IEC Plug so that a decent power cable could fit. Great foresight!
Also, congrats on getting the photos up!!! looks great...
Title: Re: Danish Crack build
Post by: langendorf on December 17, 2011, 06:55:22 AM
Quote from: jrihs on December 16, 2011, 02:09:34 PM
Nice, I used similar signal wire and love it. I SOOO WISH I thought to reverse the IEC Plug so that a decent power cable could fit. Great foresight!
Also, congrats on getting the photos up!!! looks great...

Hi

Thanks :) Yes. there is not much room for other than stock powercords, if you dont reverse it.  But it is a quick fix if you deside to change it :)
Title: Re: Danish Crack build
Post by: langendorf on December 17, 2011, 10:36:24 AM
Here are the new potmeter and some new wire. Where else can i change the cable where there isnt high voltage? the cabel is 0,5mm


(http://img855.imageshack.us/img855/3922/dsc0006ba.jpg) (http://img855.imageshack.us/i/dsc0006ba.jpg/)