Bottlehead Forum
Bottlehead Kits => BeePre => BeeQuiet attenuator => Topic started by: xcortes on July 09, 2013, 05:11:00 AM
-
I can't really figure out the BeeQuiet insertion loss (btw, first BH product without schematic, I would recommend adding it to the manual). The stock volume control is 2.5 dB. What's the insertion loss of the Bee Quiet at the max level? I' trying to squeeze gain to eliminate a stage and a couple of extra dB would come in handy.
Thanks
-
The insertion loss of the BeeQuiet attenuator 2.61dB.
The simplicity of the circuit and the lack of DC voltage made the schematic seem unnecessary.
-PB
-
Thanks Paul, that's what I needed ;)