Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => Stereomour => Topic started by: Daikini on August 11, 2013, 05:11:55 PM
-
I have seen the 7062 offerred as a substitute for a 12at7.
It draws more heater current than the 12at7 (200 ma vs 150). Would this be a problem for the stereomour power transformer?
Are there other differences I should be concerned about?
-
The voltages at OA/OB will drop a little, but the 7062 should work nicely.
-PB