Bottlehead Forum
Bottlehead Kits => S.E.X. Kit => Topic started by: boulos on September 09, 2013, 06:30:52 AM
-
Hi,
I think I found 3 errors in the C4S 2.1 Manual:
- Page 12, paragraph 1: Either terminal 4 is 420V or terminal 5 is 210V.
[I scratched my head a lot rereading terminal 5 and hoping for 420V.]
- Page 11, paragraph 5: The 4" twisted wire should be connected to OB and IB, not OA and IA. The picture is correct.
- Page 11, paragraph 2: 2.25" for the black wire is very tight. 2.5" was much easier to work with.
Hope this helps.
Boulos
-
Thanks Boulos!
I'll get these cleared up in the manual for future builders.