Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Seduction => Topic started by: booangler on September 30, 2013, 04:01:07 AM

Title: How Bad...
Post by: booangler on September 30, 2013, 04:01:07 AM

... Will the seduction sound if I use 10% capacitors in place of the 5% .033 capacitors in the RIAA Section? Seems that I lost one of the originals while waiting for two replacement resistors to arrive. Didn't loose those just installed them in the wrong location. I should remember to stop working once I get past the point of tired.

And yes my kit has been sitting around for a while, and now I want it finished yesterday!

Thanks,

Alan

Title: Re: How Bad...
Post by: Paul Birkeland on September 30, 2013, 04:09:51 AM

My suggestion is to buy ten and measure out a close pair.

Title: Re: How Bad...
Post by: booangler on September 30, 2013, 05:15:34 AM

Thank you Paul.

I decide to clean up my work bench, and do you know what I found??

Yup the missing cap. it had made its way under and behind my lcd monitor. Little Bastard.

Cheers,

Alan

Title: Re: How Bad...
Post by: Grainger49 on September 30, 2013, 06:00:10 AM

That is what I was going to say.  The parts are inexpensive. 

You can also match the right and left channels to the last digit on your meter.