Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => The Fix => Topic started by: meljackson on December 24, 2013, 04:06:53 AM
-
I see from the manual -
"The source impedance should be no greater than than 4KΩ (the output impedance of Eros, Reduction, and Quickie with PJCCS) and the load impedance should be no less than 100KΩ (the input impedance of most of our amps)."
But would the best place be between Eros and BeePre or BeePre and Paramount? or would there be no audio difference. Clearly the second is more flexible for other sources, but my main source is Vinyl.
Thanks in advance as I am just too lazy to get out the manuals and work out the various impedances.....
Best wishes for the holidays
Mel
-
Put it between the Bee Pre and the Paramounts.