Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => Smash => Topic started by: paulw on December 30, 2014, 03:38:09 AM
-
Just wondered if anyone had tried this Russian equivalent for no other reason than it would be a visually similar to the 4P1L's shape.
(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fi142.photobucket.com%2Falbums%2Fr81%2F4will8%2Faudio%2FOD3_zps0ae29f7f.jpg&hash=0db71e902c4c1c8674f9c657402e61e3e1e0d923) (http://s142.photobucket.com/user/4will8/media/audio/OD3_zps0ae29f7f.jpg.html)
it's the little tube on the left.
Paul
-
I tried one before in a test circuit and it kept going out where two different VR150's worked fine. From memory i was only feeding it 180v so i think it may require a higher voltage to light and stay running. I believe 185v is the norm striking voltage for these tubes. It may work fine in a smash circuit, but personally i much prefer the look of the big glass tubes..
-
I've used an 0D3A in a Foreplay III, which is also a smaller tube. I liked it because it fits nicely in my low-headroom rack, but it did cause some noise. My Raytheon potato masher has been solid for years. I also think the little BIG little tube pattern looks nice.
Disclaimer that should be on all tube discussions but never is:
This sample size is tiny: I have used one tube of this type. This is neither an authoritative nor definitive survey. Anyone that draws sweeping conclusions about a tube type or manufacturer based on one tube is foolish. Anyone that pulls together a large enough sample set to make conclusions is insane.
-
Potato masher lol.
I was trying to decide if i was foolish or insane when i remembered the box of Sylvania OD3Ws i have here. Its better to be insane than foolish :)