Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Quicksand => Topic started by: rmryan on April 05, 2015, 04:17:21 PM

Title: Too tall! (need caps)
Post by: rmryan on April 05, 2015, 04:17:21 PM

After mounting the 2200uF capacitors on the PCB as directed by the instructions and mounting it on the top plate the whole assembly is waaay too tall to fit in my Hammond box, and I bought the 2" high one!

I guess I'm going to have to mount them horizontally, but I've already soldered these in and clipped the leads, so I am going to have to purchase a couple of replacements.  Could I possibly have the digi-key part number for these Nichicons?

Title: Re: Too tall! (need caps)
Post by: Paul Birkeland on April 08, 2015, 08:51:11 AM

They are Nichicon KA, 2200uf 35V.  (That's enough to bring up the correct part on multiple parts websites)

-PB

Title: Re: Too tall! (need caps)
Post by: rmryan on April 08, 2015, 03:03:29 PM

Thanks, PB.  Found 'em.