Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => Tode => Topic started by: tsingle999 on August 07, 2015, 03:13:59 PM
-
The midscoop dial on my tode has 9 turns instead of 3. Did i do something wrong?
-
There is a series of holes around the shaft of the switch that set the number of positions by inserting the tab of the tabbed washer into the corresponding hole. To fix it, turn the switch all the way counterclockwise, remove the switch from the chassis, move the tabbed washer to position 3, then reassemble.
-
Thanks!