Bottlehead Forum
Bottlehead Kits => Crack => Topic started by: vanofmonks on June 20, 2010, 05:06:23 PM
-
Replaced the final PS Resistor with a choke. Put c4s's on th driver tube. Added a crossfeed circuit. The crossfeed doesn't seem to do anything, and it seems to have only about a 2k input impedance. So i'm not sure if I screwed it up. It still sounds awesome.
(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fimg697.imageshack.us%2Fimg697%2F420%2Fcrackbottom1.jpg&hash=3fbee569a92b4acd729c817bf7cff4f69d314bb0)
(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fimg227.imageshack.us%2Fimg227%2F1745%2Fcrackbottom2.jpg&hash=f5de73954e6c4d42721fcd0b28625825b3afb10c)
(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fimg94.imageshack.us%2Fimg94%2F4862%2Fcracktop.jpg&hash=9e06537463800d1094b79ba5e60ea7fd691ba200)
Chris
-
Which choke did you end up going with?
-
The same one that is in the Paramour 1 with the transformer with the solder tabs. That one is actually from one of my old paramours (thats why its painted). It has a 270 ohm or so DCR with 10 H. I think it is a triad c7x if I remember right.
-
I think it is a triad c7x if I remember right.
Perfect! Are you using a CLC supply? I ask because I stated that it is likely quiet enough to have 220uf-> 10H -> 220uf (or 440uf if you double up), but I have yet to try it.
-
CB,
Speaking of PS's, how did your experiment with the OD3(?) go? I like the creamy texture glow tubes give to some amps but sometimes it's a little too much for my taste.
-
I'm running it CRCLC. Just replaced the resistor between 13 and 15 with the choke.