Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => Smash => Topic started by: pjnestor on December 26, 2015, 06:50:20 AM
-
I just finished building the Smash kit. Resistance check was good, but voltage check showed about twice the expected.
terminal
4 340 V
9 340 V
15 116 V
16 116 V
17 460 V
20 340 V
21 106 V
22 105 V
29 464 V
35 490 V
A2, C2 109, 98
A3, C3 114, 104
A4, C4 2,2
A8, C8 2,2
B3 465 V
B5 331 V
B7 460 V
I'v double checked the high voltage supply. The transformer measures 177 V at 6,7.
-
Which terminal are you using for a ground?
I would suspect that you have some very flaky solder joints that are giving these reading errors.
-PB
-
I don't know what I did wrong, but reheated all the terminals in the high voltage supply. Everything seems normal now and it sounds good.
Thanks,
Pat