Bottlehead Forum

Bottlehead Kits => Stereomour II => Topic started by: Jamier on September 14, 2016, 06:38:29 PM

Title: Keeping balance pot with Mourquiet
Post by: Jamier on September 14, 2016, 06:38:29 PM

Is it possible to keep the balance control and install Mourquiet? I was thinking that if the amp had one input only the balance control could be moved to the input selector position which would leave the other two pot positions available for the Mourquiet pots.

Jamie

Title: Re: Keeping balance pot with Mourquiet
Post by: Paul Birkeland on September 19, 2016, 06:20:56 AM

The impedance of the attenuator is not constant, so attempting to use the stock balance control with the Mourquiet will result in poor performance.